Newest products
OPR (ONE PIECE RECURVE)
365.00€
Forward riser design one piece recurve bow.
Designed for good arrow speed and shooting stability. These bows are more stable than classic traditional recurve bows because of higher bracing height that gives better arrow clearence and forward riser that makes bow less torque sensitivite in grip. Arrow speed is about the same or better because of more pronounced limb profile and smaller limb tips. Thick mycarta/G10 accent lines in riser gives extra stifness, weight and durability. And lastly forward riser makes bow perform like longer bow because that forward riser/higher bracing height reduces dynamic draw length. This might be useful in hunting/3d shooting where shorter - more manoeuvrable bow is advantage.
In standard bow comes with installed shelf and strike plate, string with cat whisker silencers, adjustable height tie on nocking point.
In standard center cut is 1/8" past center (~3.0mm). For additional cost it can be cut up to 3/16" (4.7mm) past center. To do this extra reinorcement material in riser is added and there might be also some draw weight limitations.
All bows are made according to AMO standard and made +/- 1LBS to ordered draw weight
- BOW LENGTH: 56", 58", 60", 62"
- DRAW WEIGHT: 20-65#@28" AMO
- RISER: Wenge, Bubinga, Merbau, Walnut, Hard maple, Ash, Oak, Iroko, Zebrano, Polisander,CWP Actionwood, SaRaiFo actionwood, Mycarta.
- LIMBS: Hard maple or bamboo core, Stabilcore composite laminate, Clear or Black fiberglass laminates, Decorative veneer under clear fiberglass
- LIMB VENEER OPTIONS: Olive ash, Curly bubinga, Ziricote, Santos polisander, Zebrano,CWP Actionwood, Walnut, Elm, Bocote, Lima, Red gum, macasar ebony, color dyed maple or birch
- STRING: Fast Flight Plus or BCY Spectra 652 flemish twist string with tie on nocking point. String thickness in standard is made to fit carbon/aluminium arrow nocks. Please specify if you plan to use wood arrows, then string will be made thicker.
| Draw length | Recommended bow length |
| <26" | 56" |
| 26"- 28" | 58" |
| 28"-30" | 60" |
| >30" | 62" |
But you can step one bow length size up if prefer more smoother/comfortable draw or one length size down if prefer better manoeuvrability in woods, compactness for transporting.
RDL (REFLEX - DEFLEX LONGBOW)
265.00€
AVAILABLE AS STOCK BOW ONLY. CAN'T BE CUSTOM ORDERED.
RDL (reflex - deflex longbow).
Well executed, classic style longbow model with multiple customization options. More radical reflex-deflex limb profile for greater arrow speed or for use of heavier arrows with no speed loss. Meets IFAA and WA longbow rules. Available in RIGHT hand, LEFT hand and BOTH hand versions. Tillered for split finger (SF) or three under (3U) draw. Carbon limb options. Grip style options. Socket and sleeve takedown system option.
- BOW LENGTH: 66", 68", 70"
- DRAW WEIGHT: 15-60#@28" AMO
- RISER: Arrow shelf cut to center to meet longbow rules, can be cut past center if FR4 material is used in riser or if that is low poundage bow. Grip stippling option. Laser engraved belly overlays, moose antler coins etc.
- LIMBS: Black glass or clear glass limbs with wood veneer under. European ash, hard maple or bamboo core options. Single, double or triple carbon limb options. Bearpaw stabilcore laminate option.
- STRING: Endless lopp Fast Flight plus or BCY SPECTRA 652 string. BCY 3D end serving. BCY 62xs center serving. Flemish twist string option. Tie on nocking point.
| Draw length | Recommened bow length |
| <28" | 66" |
| 28"- 30" | 68" |
| 30"- 32" | 70" |
HRL IFAA
550.00€
HRL IFAA- Heavy riser longbow to meet IFAA longbow rules
This bow is designed as competition longbow. Meaning that bow has carbon limbs with bamboo core and small-lighweigt limb tips for good arrow speed. Bow has massive/heavy FR4 material riser to add stability and limit handshock. And bow is relatively long so that string around fingers doesn't make sharp angles and so "finger pinch" is limited and it is easer to make clean arrow release.
Limb construction:
- unidirectional carbon back
- bamboo core
- black Gordon composites glass belly
- more pronounced reflex/deflex limb design for better arrow speed and smoother draw
- full carbon limb option available for aditional cost (+100euro)
Riser construction:
- Massive design and heavy FR4 material for extra riser weight. (bow mass ~1600gram)
- Grip height options, grip style options
- Cut to center to meet IFAA longbow rules.
- Sight window cut shape to meet IFAA rules
- Laser engraved antler or metal medalion options
- Grip stippling and metal insert option
Other
- Bow length 64" 66" 68"
- Draw weight 20# - 60#
- Limb tiller for split finger (SF) or three under (3U) draw styles
- Endless loop string made of Spectra BCY, BCY 3D String serving thicknes customization option to fit your arrow nock size.
- Take down option available (+80euro)
- Budget version with cheaper Bearpaw glass and/or no high modulus carbon and/or no FR4 riser.
Recomended bracing height:
- 66" - 200mm +/-10 (~8")
- 68" - 210mm +/-10 (~8 1/2")
- 70" - 220mm +/-10 (~8 3/4")
TDR 40
525.00€
OPR bow model take down version.
Booth models have same limb design, same bow length options, same grip options etc. only difference is heavier riser for TDR bow because of metal limb fixing hardware and extra use of FR4 material.