Products
OPR (ONE PIECE RECURVE)
365.00€
Forward riser design one piece recurve bow.
Designed for good arrow speed and shooting stability. These bows are more stable than classic traditional recurve bows because of higher bracing height that gives better arrow clearence and forward riser that makes bow less torque sensitivite in grip. Arrow speed is about the same or better because of more pronounced limb profile and smaller limb tips. Thick mycarta/G10 accent lines in riser gives extra stifness, weight and durability. And lastly forward riser makes bow perform like longer bow because that forward riser/higher bracing height reduces dynamic draw length. This might be useful in hunting/3d shooting where shorter - more manoeuvrable bow is advantage.
In standard bow comes with installed shelf and strike plate, string with cat whisker silencers, adjustable height tie on nocking point.
In standard center cut is 1/8" past center (~3.0mm). For additional cost it can be cut up to 3/16" (4.7mm) past center. To do this extra reinorcement material in riser is added and there might be also some draw weight limitations.
All bows are made according to AMO standard and made +/- 1LBS to ordered draw weight
- BOW LENGTH: 56", 58", 60", 62"
- DRAW WEIGHT: 20-65#@28" AMO
- RISER: Wenge, Bubinga, Merbau, Walnut, Hard maple, Ash, Oak, Iroko, Zebrano, Polisander,CWP Actionwood, SaRaiFo actionwood, Mycarta.
- LIMBS: Hard maple or bamboo core, Stabilcore composite laminate, Clear or Black fiberglass laminates, Decorative veneer under clear fiberglass
- LIMB VENEER OPTIONS: Olive ash, Curly bubinga, Ziricote, Santos polisander, Zebrano,CWP Actionwood, Walnut, Elm, Bocote, Lima, Red gum, macasar ebony, color dyed maple or birch
- STRING: Fast Flight Plus or BCY Spectra 652 flemish twist string with tie on nocking point. String thickness in standard is made to fit carbon/aluminium arrow nocks. Please specify if you plan to use wood arrows, then string will be made thicker.
| Draw length | Recommended bow length |
| <26" | 56" |
| 26"- 28" | 58" |
| 28"-30" | 60" |
| >30" | 62" |
But you can step one bow length size up if prefer more smoother/comfortable draw or one length size down if prefer better manoeuvrability in woods, compactness for transporting.
RDL (REFLEX - DEFLEX LONGBOW)
265.00€
RDL (reflex - deflex longbow).
Well executed, classic style longbow model with multiple customization options. More radical reflex-deflex limb profile for greater arrow speed or for use of heavier arrows with no speed loss. Meets IFAA and WA longbow rules. Available in RIGHT hand, LEFT hand and BOTH hand versions. Tillered for split finger (SF) or three under (3U) draw. Carbon limb options. Grip style options. Socket and sleeve takedown system option.
- BOW LENGTH: 66", 68", 70"
- DRAW WEIGHT: 15-60#@28" AMO
- RISER: Arrow shelf cut to center to meet longbow rules, can be cut past center if FR4 material is used in riser or if that is low poundage bow. Grip stippling option. Laser engraved belly overlays, moose antler coins etc.
- LIMBS: Black glass or clear glass limbs with wood veneer under. European ash, hard maple or bamboo core options. Single, double or triple carbon limb options. Bearpaw stabilcore laminate option.
- STRING: Endless lopp Fast Flight plus or BCY SPECTRA 652 string. BCY 3D end serving. BCY 62xs center serving. Flemish twist string option. Tie on nocking point.
| Draw length | Recommened bow length |
| <28" | 66" |
| 28"- 30" | 68" |
| 30"- 32" | 70" |
HRL (HEAVY RISER LONGBOW )
550.00€
HRL - Heavy riser longbow
Designed as more universal longbow. Will be good choice for competition shooting because of more massive and so more stable riser, and also good choice for hunting/recreational shooting because of shorter bow length (compared to real competition longbows).
Limb construction:
- unidirectional high modulus carbon back
- stabilcore laminate for extra torsional stability
- bamboo core
- black Gordon composites glass belly
- more pronounced reflex/deflex limb design for better arrow speed and smoother draw
Riser construction:
- Massive design and FR4 material for extra riser weight. (bow mass ~1600gram)
- Grip height options (low, medium, high), grip style options (flat or convex), grip size (large >EU12, medium EU8-EU12, small
- In standard cut to center to meet WA, IFAA longbow rules. Can be cut 1/8" past center
- Sight window cut style options (to meet WA or IFAA rules)
- Laser engraved antler or metal medalion options
- Grip stippling and metal insert option
Other
- Bow length 64" 66" 68"
- Draw weight 20# - 60#
- Limb tiller for split finger (SF) or three under (3U) draw styles
- Endless loop string made of Spectra BCY, BCY 3D String serving thicknes customization option to fit your arrow nock size.
- Take down option available
- Budget version with cheaper Bearpaw glass and/or no high modulus carbon and/or no FR4 riser. (available from year 2024)
TDR 40
575.00€
OPR bow model take down version.
Booth models have same limb design, same bow length options, same grip options etc. only difference is heavier riser for TDR bow because of metal limb fixing hardware and extra use of FR4 material.
CWP Technical wood riser
20.00€
Carefully selected birch veneers are throughout dyed using environmentally friendly methods, which contains no harmful substances. Material is made in Europe, Finland.
Inserts for bow quiver, sight, stabilizer etc.
20.00€
Inserts for bow quiver, stabilizer, sight, plunger, arrow rest, fishing reel etc..
AMO standard or custom thread size options available.
Laser engravings
20.00€
Info about custom laser engravings
Picture/ drawing for laser engraving shouldn’t have small details. Small details will burn together and it is not possible to laser engrave them. Space for laser engraving is 25mm diameter circle for OPR bow, 20mm diameter circle for HRL. If you scale picture to fit this size then space between details should be minimum 1.0-1.5mm apart.
Picture/drawing also should have two contrasting color composition. Stencil images work very well for this reason. If you are looking for ideas you can search for stencil type drawings, e.g. „bear stencil”, „wilderness stencil”, “bird stencil” etc.. Or you can search for some sort of symbols or patterns e.g. “Aztec symbols”, “Viking symbols”, “native American symbols” etc..
You can also make drawing for laser engraving yourself. You can draw it with black marker on white paper and send me photo or scan of that drawing. I can then edit it and use for laser engraving.
Text will also work for laser engraving.
FR4 riser
60.00€
Partial or full FR4 riser option.
FR4 material adds extra weight, stiffness and durability. Comes in black color only.
Pricing:
- partial FR4 riser (back part of riser made of FR4) 60 euro
- full FR4 riser 80 euro
Grip stippling
15.00€
Grip stippling - grip surface is covered with tiny hole pattern that creates more traction.
Stippling can be done for aesthetic and also practical reasons. Under adverse conditions in which one's hands may be slick form sweat, dust or blood , stippling will provide better grip on your bow.
Clear fiberglass limbs
20.00€
Clear fiberglass laminate limbs with decorative wood veneer under.
Wood veneer choice for natural wood: olive ash, zebrano, bocote, polisander, birdseye maple, curly bubinga, walnut, european ash, red gum (apple), ziricote
Wood veneer choice for technical wood:
S-RDL (SIMPLE-RDL)
205.00€
S-RDL(SIMPLE REFLEX DEFLEX LONGBOW)
Budget version of RDL bow model. Made in standard material combinations and there are no customization options. Sold as in stock bow only.
- Limbs: black glass and/or clear glass with walnut/zebrano/polisander/ veneer under. European ash core. Brown/black micarta limb tips
- Riser: made of limited exotic and/or local hardwood - merbau, zebrano, ash, oak, iroko, wenge, maple
- String: low stretch material (652 Spectra or Fast Flight Plus) endless loop string with BCY 3D loop and end serving and BCY 62 XS center serving. Brass nocking point.
- Draw weight 15-45#@28"AMO
- Bow length 66"68"70"AMO
- Handedness: Righ, left, both hand versions
- Comes with installed leather arrow shelf and strike plate material
| Draw length | Recommened bow length |
| <28" |
66" |
| 28"-30" |
68" |
| 30"-32" |
70" |
Shipping only within Europe! Oversea shipping prices for these longer items are extremely high.
Allen key 5mm
2.50€
5mm metric Hex key (Allen key). Hardened black alloy steel. Length of longer arm 80mm, length of the shorter arm 28mm.
For TDR bow assembling/disassembling.
TDR 45
625.00€
TDR bow model version with 45cm long riser.
Longer riser adds extra mass for better bow stability and enables larger sight window for better view of target.
*Due to the fact that bows are made on manual machines and hand shaped then limbs and risers are curently not interchangable from bow to bow. To order seprate set of limbs or riser old bow riser/limbs are needed. (Or they have to be all ordered at the same time). One day I should get CNC machines and then this problem should be solved. But for now it is what it is.