Customization options
Price category B
0.00€
Merbau, zebrano, iroko, ipe, wenge, hard maple, white oak, baltic birch, white ash, walnut, bubinga, European oak, elm,
Price category A
35.00€
Hard to get, rare, expensive wood materials.
Amaranth (purpleheart), olive ash, birch burl, polisander, makasar ebony, spalted stabilized wood, resin colored wood
CWP Technical wood
25.00€
Carefully selected birch veneers are throughout dyed using environmentally friendly methods, which contains no harmful substances. Material is made in Europe, Finland.
SaRaiFo technical wood
15.00€
SaRaiFo is man made technical wood product. Made from colored, fast growing wood species veneers.
Available color options:
- SRF Cocobolo,
- SRF Rosewood/Palisander
- SRF birch burl/betula
- SRF Ebono burl,
- SRF Makasar ebony crown,
- SRF olive ash,
- SRF Macassar Ebano Ebene
Standard veneer options
20.00€
Polisander, walnut, zebrano, bocote, olive ash, curly bubinga, hard maple, elm, ash, oak
Premium veneer options
40.00€
curly birch, cocobolo, shedua, birdseye maple, spalted wood, amaranth (purpleheart),
Bearpaw carbon laminate
25.00€
Extra layer of Bearpaw carbon laminate for increased speed and better thermal limb stability.
Can be used for longbows and recurve bows.
Classic style grip (standard)
0.00€
Classic style grip.
Convex grip surface with higly rounded edge (See second picture). Most of traditional bows are made with same or similar style grip shape.
*All grips are hand shaped so there might be some small variances in shape,size and they might not look exactly the same like grip in fotos.
Jager style grip
0.00€
Flat and slightly inverted grip surface with disctinct life line indicator relief on grip edge
Flat grip
0.00€
Flat, slightly inverted grip surface. Prety much the same grip shape as for Jaeger style grip but without lifeline indicator relief.
Best grip shape for traditional bows acording to "SOLID Archery mechanics" teaching course.
*All grips are hand shaped so there might be some small variances in shape,size and they might not look exactly the same like grip in fotos.
Olympic recurve style grip
0.00€
Patterned after olympic recurve grip shape.
Slightly convex, almost flat grip surface with just slightly rounded grip edge. Highest poin of grip surface is located on vertical axis/centerline of riser.
Grip height option for recurve bows
0.00€
Low, medium and high grip options for recurve bow models. Medium height is standard and recommended option
Angle from horizont
Low ~58 degree
Medium ~53 degree
High ~48 degree
Grip stippling
15.00€
Grip stippling - grip surface is covered with tiny hole pattern that creates more traction.
Stippling can be done for aesthetic and also practical reasons. Under adverse conditions in which one's hands may be slick form sweat, dust or blood , stippling will provide better grip on your bow.
Accessories inserts
10.00€
Inserts for bow quiver, stabilizer, sight, plunger, arrow rest, fishing reel etc..
AMO standard or custom thread size options available.
Price for single insert position
Accent laminate color
0.00€
Accent laminates are glued up of ~2mm thick black or white FR4 and 2-1mm thick wood laminates. Wood material options are the same as for riser materials. But for diffrent colors that woud be of:
- Red color bubinga or SRF cocobolo,
- brown color zebrano or merbau,
- dark brown/chocolate color wenge,
- tan color hard maple,
- green color CWP GGR
- pink color CWP pink
- etc.
Final accent laminate thickness should be 12mm for OPR and TDR bow models and 6mm for HRL longbow model. So you can choose combination of 6-10 laminates for TDR/OPR 3-5 for HRL. But one thing to keep in mind is that for higher poundage TDR or OPR bows at least half of laminates should be made of black FR4. This gives extra stifnes and durability for riser. Lower poundage bows can be made with only wood accent laminates.
At the moment FR4 is available in black and white color only but in future I should get red, yellow and all kind of colors.
IF YOU DON'T WANT TO OVERCOMPLICATE ORDERING PROCESS THEN I CAN SELECT ACCENT LAMINATE COLOR AND PATTERN MYSELF. I WILL TRY TO MATCH THEM TO REST OF BOW MATERIALS/COLORS.
Belly tip overlay
10.00€
Decorative veneer overlay at the limb tips on belly side
FR4 material riser
50.00€
Partial or full FR4 riser option.
FR4 material adds extra weight, stiffness and durability. Comes in black color only.
Pricing:
- partial FR4 riser (back part of riser made of FR4) 60 euro
- full FR4 riser 80 euro
Laser engraving
15.00€
Moose antler laser engraving
Info about custom laser engravings
Picture/ drawing for laser engraving shouldn’t have small details. Small details will burn together and it is not possible to laser engrave them. Space for laser engraving is 25mm diameter circle for OPR bow, 20mm diameter circle for HRL. If you scale picture to fit this size then space between details should be minimum 1.0-1.5mm apart.
Picture/drawing also should have two contrasting color composition. Stencil images work very well for this reason. If you are looking for ideas you can search for stencil type drawings, e.g. „bear stencil”, „wilderness stencil”, “bird stencil” etc.. Or you can search for some sort of symbols or patterns e.g. “Aztec symbols”, “Viking symbols”, “native American symbols” etc..
You can also make drawing for laser engraving yourself. You can draw it with black marker on white paper and send me photo or scan of that drawing. I can then edit it and use for laser engraving.
Text will also work for laser engraving.
Black fiberglass limbs
0.00€
No aditional cost for black fiberglass laminates limbs
Narrow arrow shelf
0.00€
In standrad arrow shelf is ~12mm wide. But for better arrow clearance it can be shaped to 8-10mm width. Downside for this is that arrows may fall off the shelf easier, and for beginner archers that might be annoying thing to have.