CWP Technical wood
€25.00
-
Carefully selected birch veneers are throughout dyed using environmentally friendly methods, which contains no harmful substances. Material is made in Europe, Finland.
interesetd_in_more
Grip height option for recurve bows
0.00€
Low, medium and high grip options for recurve bow models. Medium height is standard and recommended option
Angle from horizont
Low ~58 degree
Medium ~53 degree
High ~48 degree
Laser engraving
15.00€
Moose antler laser engraving
Info about custom laser engravings
Picture/ drawing for laser engraving shouldn’t have small details. Small details will burn together and it is not possible to laser engrave them. Space for laser engraving is 25mm diameter circle for OPR bow, 20mm diameter circle for HRL. If you scale picture to fit this size then space between details should be minimum 1.0-1.5mm apart.
Picture/drawing also should have two contrasting color composition. Stencil images work very well for this reason. If you are looking for ideas you can search for stencil type drawings, e.g. „bear stencil”, „wilderness stencil”, “bird stencil” etc.. Or you can search for some sort of symbols or patterns e.g. “Aztec symbols”, “Viking symbols”, “native American symbols” etc..
You can also make drawing for laser engraving yourself. You can draw it with black marker on white paper and send me photo or scan of that drawing. I can then edit it and use for laser engraving.
Text will also work for laser engraving.
OPR (ONE PIECE RECURVE)
365.00€
Forward riser design one piece recurve bow.
Designed for good arrow speed and shooting stability. These bows are more stable than classic traditional recurve bows because of higher bracing height that gives better arrow clearence and forward riser that makes bow less torque sensitivite in grip. Arrow speed is about the same or better because of more pronounced limb profile and smaller limb tips. Thick mycarta/G10 accent lines in riser gives extra stifness, weight and durability. And lastly forward riser makes bow perform like longer bow because that forward riser/higher bracing height reduces dynamic draw length. This might be useful in hunting/3d shooting where shorter - more manoeuvrable bow is advantage.
In standard bow comes with installed shelf and strike plate, string with cat whisker silencers, adjustable height tie on nocking point.
In standard center cut is 1/8" past center (~3.0mm). For additional cost it can be cut up to 3/16" (4.7mm) past center. To do this extra reinorcement material in riser is added and there might be also some draw weight limitations.
All bows are made according to AMO standard and made +/- 1LBS to ordered draw weight
- BOW LENGTH: 56", 58", 60", 62"
- DRAW WEIGHT: 20-65#@28" AMO
- RISER: Wenge, Bubinga, Merbau, Walnut, Hard maple, Ash, Oak, Iroko, Zebrano, Polisander,CWP Actionwood, SaRaiFo actionwood, Mycarta.
- LIMBS: Hard maple or bamboo core, Stabilcore composite laminate, Clear or Black fiberglass laminates, Decorative veneer under clear fiberglass
- LIMB VENEER OPTIONS: Olive ash, Curly bubinga, Ziricote, Santos polisander, Zebrano,CWP Actionwood, Walnut, Elm, Bocote, Lima, Red gum, macasar ebony, color dyed maple or birch
- STRING: Fast Flight Plus or BCY Spectra 652 flemish twist string with tie on nocking point. String thickness in standard is made to fit carbon/aluminium arrow nocks. Please specify if you plan to use wood arrows, then string will be made thicker.
| Draw length | Recommended bow length |
| <26" | 56" |
| 26"- 28" | 58" |
| 28"-30" | 60" |
| >30" | 62" |
But you can step one bow length size up if prefer more smoother/comfortable draw or one length size down if prefer better manoeuvrability in woods, compactness for transporting.